Tektronix 560 User Manual
Page 203
Troubleshooting
7
User Manual
7-31
Macintosh users
Note
If you are using QuickDraw GX and System Software 7.5, you
can download printer utilities from the Tektronix Phaser 560 GX
printer driver; refer to topics on the printer’s CD-ROM or the
Tektronix World Wide Web site for instructions.
1.
Follow the instructions starting on page 3-16 to install the utility
files from either the printer’s CD-ROM or the Printer Software for
Macintosh diskette.
2.
Select the appropriate printer in the
Chooser
.
3.
Locate the
LaserWriter Utility
in the
PhaserTools
folder on your
computer’s hard disk, and double-click its icon to start the
application.
4.
Choose
Download PostScript File
from the
Utilities
menu.
5.
Select one of the following files from the list, then click
Open
.
(These files were installed in the
Phaser 560 Utilities
folder, inside
the
PhaserTools
folder.)
■
Select
Setscreen On
to enable setscreen operations.
■
Select
Setscreen Off
to disable setscreen operations.
6.
At the prompt
Save PostScript output as:
you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
7.
Click
Save
to send the file to the printer.
8.
If no output is returned by the printer, the
LaserWriter Utility
displays a dialog box; click
OK
to continue.