Using the adobe postscript driver for windows 3.1 – Tektronix 560 User Manual
Page 74
4
Printing Basics
4-10
Phaser 560 Color Laser Printer
Using the Adobe PostScript driver for Windows 3.1
To select printing options, follow these steps:
1.
From the
Control Panel
, double-click the
Printers
icon.
2.
In the
Printers
dialog box, choose the
Tektronix Phaser 560
printer, then click
Setup
. A dialog box
appears with the printer’s name across the top.
3.
Click the following tabs to see printing options; refer to your Windows documentation for more
information on tabs and options.
Paper
For media options (sizes, types, and source)
Features
For printer-specific options such as color correction.
■
Set the
Timeout settings
. Refer to “Setting the timeouts” on page 4-11 for instructions.
PostScript
For PostScript-related options
■
In the
Performance Options
field, select the
Use PostScript Level 2 Features
option.
■
Under
PostScript Timeout
values, leave
Job Timeout
set to
0
. Leave the
WaitTimeout
set to the
default,
240
(4 minutes). Setting it higher ensures that you will not lose a multi-page job due to a
timeout after the
Transmission Retry
alert message is displayed.
Job Control
For print job-related options
Note
The PostScript header contains important PostScript information that must accompany each print job;
it is not a banner page printed with each job. If an option is not selected, an error message is displayed
on your computer screen and your job does not print.
■
Click one of the following in the
PostScript header
field:
■
Download Each Job
This option downloads PostScript header information with each print job.
■
Already Downloaded
This saves the PostScript header information in the printer. After selecting this button, select
the
Download
button. This option makes print files a little smaller and faster than the first
option, but you need to click the
Download
button every time the printer is turned off or reset.
■
For better performance, select the
Binary Mode
option.