TRENDnet TEG-PCBUSR - Manual (Page 11)

17
Wake On LAN
This section allows user to wake up remote computer by
Ethernet Address, IP Address or NetBIOS Name through
selected network adapter.
To Wake up a remote computer that is in Standby,
Hibernate or Shutdown mode, user can choose three
methods to do it. Choose “Ethernet Address” and key in
the Ethernet Address (e.g. key in Ethernet Address:
123456ABCDEF). Or choose “IP Address” and key in the
IP Address (e.g. key in IP Address: 192.168.10.10).
Otherwise choose “NetBIOS Name” and key in the
NetBIOS Name (e.g. key in NetBIOS Name: PC1).
18
Technical Specifications
General
Standards IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
ANSI/IEEE Auto-Negotiation
32-bit CardBus PC Card
Protocol CSMA/CD
Data Transfer
Rate Ethernet: 10Mbps (half-duplex)
20Mbps(full-duplex)
Fast Ethernet: 100Mbps (half-duplex)
200Mbps (full-duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
Network Cables 10BASE-T: 2-Pair UTP/STP Cat. 3,4,5
100BASE-TX: 2-Pair UTP/STP Cat. 5
1000BASE-T: 4-pair UTP/STP Cat. 5e, 6
Physical and Environmental
Temperature Operating: 0 ° ~ 40° C, Storage: -10° ~ 70° C
Humidity Operating: 10% ~ 90%, Storage: 5% ~ 90%
EMI: FCC Class B, CE Mark B, VCCI-B