TRENDnet TEG-PCBUSR - Manual (Page 5)

5
Driver Installation
Before you connect the 32-bit CardBus
10/100/1000Mbps Gigabit Ethernet PC Card to the
network, you have to install the network driver first. The
driver for each networking operating system is under a
separate directory. A HELPME.COM file under root
directory lists the information and detailed installation
procedure of all the available drivers.
Card insertion as described in Chapter “Card Insertion
and Removal” must be completed before you proceed
with software installation.
6
Diagnostic Utility for Windows
This section will lead you to install the utility of the Gigabit
LAN PC Card.
Windows Utility Installation
Insert the Driver & User’s Guide CD-ROM to CD-Rom
driver then install the software manually, go to your
Windows Start menu and choose Run, type “D:\
Install98Se.exe” for Windows 98SE and Windows Me or
“D:\ Install2kxp.exe” for Windows 2000 and XP in the
dialog box and click OK, the install wizard will begin
installing the software. Follow the install wizard
instructions to complete the installation.
After installation process completed successfully, the
program will launch automatically and add an icon in
system tray (task area) for Windows 2000 and XP.
Besides, the default value of start up launch is enabled.
As to Windows 98SE and ME, it needs to reboot the
system to complete the installation process. The user can
configure the settings using the Diagnostic Utility;
double-click the utility icon that appears in the taskbar.