TRENDnet TEG-PCBUSR - Manual (Page 8)

11
Jumbo Frame
The Jumbo Frame allows user to set the transmit packet
data size.
To adjust the value, select a data size from the
drop-down menu. Sizes are available from 2KB MTU to
7KB MTU. Select Disable if you want to disable the
setting. Click Modify button to confirm.
Link Speed/ Duplex Mode
The Link Speed/ Duplex Mode allow user to optimize the
connection speed for data transmission.
To configure this setting, select a combination of link
speed and duplex mode from the drop-down menu, or
12
choose Auto Negotiation to enable the device to
automatically select the best transmission speed. Click
Modify button to confirm.
This network adapter supports link speed ranging from
10Mbps to 1000Mbps and both full-duplex and
half-duplex modes.
Network Address
The Network Address allows user to change the physical
address of your adapter.
To set up a physical address, type any new address in
the value field and click Modify button to save your MAC
address. This figure displays a modified network address
“1A2B3C4D5E6F”.
To power off the network adapter, select Not Present and
click Modify button to confirm.