Texas Instruments TECHNOLOGY FOR INNOVATORS 4Q 2006 - Manual (Page 23)

Texas Instruments 4Q 2006 Interface Selection Guide
PanelBus™ HDCP Digital Receiver
TFP501, TFP503
Get datasheets at: www.ti.com/ TFP501 or www.ti.com/ TFP503
The TFP501 and TFP503 are TI PanelBus flat panel display products,
part of a comprehensive family of end-to-end DVI 1.0-compliant
solutions. The TFP501/TFP503 support display resolutions up to UXGA,
including the standard HDTV formats, in 24-bit true-color pixel format.
The TFP501/TFP503 offer design flexibility to drive one or two pixels
per clock, support TFT or DSTN panels and provide an option for
time-staggered pixel outputs for reduced ground-bounce.
Key Features
• Supports UXGA resolution (output pixel rates up to 165 MHz)
• Digital visual interface (DVI) and high-bandwidth digital content
protection (HDCP) specification compliant
• Encrypted external HDCP device key storage for exceptional security
and ease of implementation
• True color, 24 bits/pixel, 48-bit dual-pixel output mode;
16.7/M colors at one or two pixels per clock
• 4x oversampling for reduced bit-error rates and better performance
over longer cables
• Embedded HDCP keys (TFP503 only)
• Supports hot-plug detection
• Packaging: 100-pin TQFP PowerPAD™
Applications
• Desktop LCD monitors
• DLP
® and LCD projectors
• Digital TVs
TFP501 block diagram.
TI PanelBus™ Digital Transmitters
TFP510, TFP513
Get the datasheets and app reports at: www.ti.com/sc/device/ TFP510 or
www.ti.com/sc/device/ TFP513
The TFP510 and TFP513 provide a universal interface allowing a glue-
less connection to most commonly available graphics controllers. Some
of the advantages of this universal interface include selectable bus
widths, adjustable signal levels and differential and single-ended
clocking. The DVI interface supports flat panel display resolutions up
to UXGA at 165 MHz in 24-bit true color pixel format.
Key Features
• Digital visual interface (DVI) compliant
• Supports resolutions from VGA to UXGA
(25-MHz to 165-MHz pixel rates)
• Universal graphics controller interface
• • 12-bit, dual-edge and 24-bit, single-edge input modes
• • Adjustable 1.1-V to 1.8-V and standard 3.3-V CMOS input signal
levels
• • Fully differential and single-ended input clocking modes
• • Standard Intel ® 12-bit digital video port compatible as on Intel
81x chipsets
• Programmable using I 2 C serial interface
• Monitor detection through hot-plug and receiver detection
• Embedded HDCP keys (TFP513 only)
• Packaging: 64-pin TQFP PowerPAD™
Applications
• Set-top boxes
• DVD recorders/players
TFP510 block diagram.
T.M.D.S. Transmitter
TX2
TX1
TX0
TXC
TFADJ
IDCK
DATA[23:0]
DE
VSYNC
HSYNC
EDGE/
HTPLG
MSEN
BSEL/SCL
DSEL/SDA
V
REF
MDA/DK2
MCL/DK1
ISEL/RST
PD
Serializer
Serializer
Serializer
Control
Encoder
Encoder
Encoder
I C Slave I/F 2
For DDC
1.8-V Regulators
with Bypass
Capacitors
PLL
for EEPROM
I C Master I/F 2
Universal Input
HDCP
Encryption
12-/24-Bit
I/F
Data
Format
HDCP
Cipher
DVI/PanelBus ™
23
➔