Texas Instruments TECHNOLOGY FOR INNOVATORS 4Q 2006 - Manual (Page 4)

Interface Selection Guide Texas Instruments 4Q 2006
Literature
Number Description
Application Notes
SCAA059 AC-Coupling Between Differential LVPECL, LVDS, HSTL, and CML
SCAA062 DC-Coupling Between Differential LVPECL, LVDS, HSTL, and CML
Part Number Description Price *
Evaluation Modules (EVMs)
SN65LVDS31-32EVM Evaluation Module for LVDS31 and LVDS32 49.00
SN65LVDS31-32BEVM Evaluation Module for LVDS31 and LVDS32B 49.00
SN65LVDS31-33EVM Evaluation Module for LVDS31 and LVDS33 49.00
SN65LVDS386EVM SN65LVDS386 Evaluation Module 49.00
SN65LVDS387EVM SN65LVDS387 Evaluation Module 49.00
SN65LVDS100EVM SN65LVDS100 Evaluation Module 99.00
SN65LVDS20EVM SN65LVDS20 Evaluation Module 49.00
SN65CML20EVM SN65CML20 Evaluation Module 49.00
SN65LVCP22-23EVM SN65LVCP22 Evaluation Module 25.00
SN65LVDS122EVM SN65LVDS122 Evaluation Module 49.00
SN65LVDS250EVM SN65LVDS250 Evaluation Module 49.00
Note: IBIS models are available at interface.ti.com
* Suggested resale price in U.S. dollars.
Literature
Number Description
Application Notes
SLLA014A Low-Voltage Differential Signaling (LVDS) Design Notes (Rev. A)
SLLA030C Reducing Electromagnetic Interference with LVDS (Rev. C)
SLLA031A Using an LVDS Receiver with TIA/EIA-422 Data (Rev. A)
SLLA034A Slew Rate Control of LVDS Circuits (Rev. A)
SLLA038B Interface Circuits for TIA/EIA-644 (LVDS) (Rev. B)
SLLA053B Performance of LVDS with Different Cables (Rev. B)
SLLA054A LVDS Multidrop Connections (Rev. A)
SLLA065 A Comparison of LinBiCMOS and CMOS Process Technologies in LVDS ICs
SLLA082B Active Fail-Safe in TI's LVDS Receivers (Rev. B)
SLLA100 Increase Current Drive Using LVDS
SLLA101 Interfacing Different Logic with LVDS Receivers
SLLA103 LVPECL and LVDS Power Comparison
SLLA104 Suggestions for LVDS Connections
SLLA105 DSP to DSP Link Using LVDS
SLLA107 Live Insertion with Differential Interface Products
SLLA147 Suitable LVDS Architectures
Resources
For a complete list of resources (evaluation modules, data sheets and application notes), visit interface.ti.com
LVDS Family of Products
LVDS2
LVDS9637
LVDS34
Singles
Transmitters Receivers Transceivers Repeaters/
Translators
Crosspoint
Switches
Up to 400 Mbps
Up to 630 Mbps
≥ 1 Gbps
Clock Distribution Devices
(See pg. 42 for table)
LVDS388A
LVDS386
CDCLVD110
LVDS108
LVDS104
LVDS105
LVDS117
LVDS116
LVDS9638
LVDS179
LVDS180
LVDS049
LVDS050
LVDS051
LVDS1050
CML100
LVDS100
LVDS101
LVDS16 LVP16
LVDS17 LVP17
LVDS18 LVP18
LVDS19
LVP19
LVDS20 LVP20
LVDS22
LVCP22
LVCP23
LVDS122
LVDS250
Duals
Quads
8 Channels
16 Channels
10 Channels
LVDS109
LVDS1
LVDS389
LVDS387
LVDS047
LVDS31
LVDS3487
LVDS391 LVDS048A/348
LVDS32/33
LVDS3486
LVDS390
Design Considerations
Signaling Rate — TI offers repeaters/transla-
tors and crosspoint switches with signaling
rates up to 4.0 Gbps.
Jitter — Reducing jitter, the deviation of a
signal timing event from its ideal position,
has become a priority for ensuring reliability
in high-speed data buses.
Skew — Excessive skew, the time delta
between the actual and expected arrival
time of a clock signal, can limit the maximum
bandwidth performance and lead to data
sampling errors. Low skew specifications
make high-speed interconnect devices
excellent for signal buffering.
Power Consumption — Low-voltage
differential signaling (LVDS) offers a low-power
alternative to ECL and PECL devices. Current-
mode drivers in LVDS produce a constant
current, which allows power consumption to
be relatively independent of frequency. The
constant current driver delivers about 3.5 mA
to a 100-W load.
Technical Information
• LVDS is based on the TIA/EIA-644A
standard conceived to provide a general-
purpose electrical-layer specification for
drivers and receivers connected in a
point-to-point or multidrop interface.
4
LVDS, xECL, CML
➔