Toshiba D-RW2SU/D-RW2SC User Manual
Page 139
139
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
C
Settings for DTS (Default : OFF)
• Select a setting using [K / L], then press [ENTER].
Your setting will be activated.
ON
: Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to
“ON”.
OFF
: No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set
to “OFF”.
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
• Using [K / L], select a setting. Press [ENTER].
Your setting will be activated.
4
Press [SETUP] to exit.
Digital Out - DTS
OFF
ON
Audio
Digital Out
Dynamic Range Control
ON
Audio - Dynamic Range Control
OFF
ON
Note
• Dynamic Range Control function is available only on the discs which are recorded in the Dolby Digital format.