Toshiba D-RW2SU/D-RW2SC - Manual (Page 151)

151
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Error message Cause Solution
Recording Error
This program is not recordable in
Video mode.
• You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode.
• Set “Format mode” to “VR mode”
(pages 52-54).
Recording Error
Cannot record on this disc.
• You are trying to record onto the
disc which is unrecordable, or
whose status is unable to record.
• The disc is dirty.
• The disc is damaged.
• Insert the recordable disc, and
ensure the disc status satisfies
the recording requirements
(page 9).
• Clean the disc with a cleaning
cloth.
• Replace the disc.
Recording Error
This program is not allowed to be
recorded on this disc.
• You are trying to record the copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
• Insert the DVD-RW disc in VR
mode (ver.1.1 or 1.2 compatible
with CPRM).
Recording Error
This disc is protected and not
recordable.
• You are trying to record on to the
protected disc which is set in the
Disc menu.
• Release the disc protect setting
in the Disc menu (pages 72-73).
Recording Error
Disc is full.
(No area for new recording)
• You are trying to record onto the
disc which has no space for
recording.
• Insert the recordable disc with
enough recording space.
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
• You are trying to record onto the
disc on which the number of
recording titles exceed the
maximum (99).
• Delete unnecessary titles
(pages 102-104).
Recording Error
You cannot record more than 999
chapters on one disc.
(The maximum is 999)
• You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
exceed the maximum (999).
• Delete unnecessary chapter
marks (pages 108-109).
Recording Error
You cannot record on this disc as
Control Information is full.
• This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been
repeatedly performed, the control
Information area may come up to
be full even the recording area
has enough space.
• Delete unnecessary titles
(pages 102-104).