Toshiba D-RW2SU/D-RW2SC User Manual
Page 53
53
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
4
Using [K / L], select “Format Mode”.
Press [ENTER].
5
Using [K / L], select “Video mode” or
“VR mode”. Press [ENTER].
The recording format will be set.
6
Press [SETUP] to exit.
Format - Format Mode
VR mode
Video mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
Notes
• The recording format setting is effective only for DVD-RW discs. You cannot change the recording format on DVD-R discs.
DVD-R discs will always be in Video mode.
• You cannot mix two formats on one DVD-RW disc. When you load a disc once recorded before, the recording
format cannot be changed even if you change it in the Setup menu.
• When inserting a brand-new DVD+R or DVD+RW disc, the error message (“Disc Error”) will appear. This unit is not
compatible with a DVD+RW/R disc.
• Playlist will be created automatically when recording on DVD-RW in VR mode.
• A blank chapter may be created depending on the remaining time of the disc.
• When you format, the entire contents on that disc will be erased.
Format
Format Mode
Video mode
Start