Toshiba D-RW2SU/D-RW2SC - Manual (Page 149)

149
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
EN
Playback
■ The disc does not play.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the
labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-
ROM) (pages 9-10).
• The region code on the DVD-Video does not match
the unit (page 10).
• Moisture has condensed inside the unit. Remove the
disc and leave the unit turned on for about two
hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the
unit cannot play the disc if it was not finalized (page
51).
■ Playback image freezes for a second.
• During the playback of two layered disc, picture may
freeze for a moment when the 1st layer switches to
the 2nd layer. This is not a malfunction.
■ The disc does not start playback from the
beginning.
• Resume play was activated (page 88). Press
[STOP C] twice.
• You have inserted a disc whose Title menu or DVD
menu automatically appears on the TV screen when
it is first insert.
■ The unit starts playing from the disc
automatically.
• The DVD-Video features an auto playback function.
■ Some functions such as Stop, Search, Fast /
Slow reverse or Fast / Slow forward cannot be
performed.
• Depending on the disc, you may not be able to do
some of the operations above. See the instruction
manual supplied with the disc.
■ The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD-
Video, DVD-R or DVD-RW being played.
• The DVD-Video prohibits the changing of the
language for the sound track.
• Try changing the language using the DVD-Video’s
menu.
■ The subtitle language cannot be changed or
turned off.
• Multilingual subtitle are not recorded on the DVD-
Video.
• The DVD-Video prohibits changing of the subtitles.
• Try changing the subtitle using the DVD-Video’s
menu.
■ The angles cannot be changed.
• Multi-angles are not recorded on the DVD-Video
being played.
• The angle-change operation is whenever possible
as long as the disc contains a multi-angle portion.
Actual change will be performed when the portion
has come up.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video’s
menu.
Recording/Timer Recording/Editing
■ The channel cannot be changed from the
channel you are recording.
• Set the TV’s input to “TV”.
■ Recording does not start immediately after you
press [REC I].
• A new DVD-R or DVD-RW has been inserted. It
takes a while for the unit to automatically format a
DVD-RW.
■ Nothing was recorded even though you set the
timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power
failure that lasted for more than 30 seconds. Reset
the clock (pages 38-43).
• Disconnect the AC power cord from the AC outlet,
and connect it again.
• The program contains copy protection signals that
restricts copying.
• The timer setting overlapped with another setting
that has priority.
■ Recording does not stop immediately after you
press [STOP C].
• It will take a few seconds for the unit to input disc
data before recording can stop.
■ Timer Recording is not complete or did not
start from the beginning.
• The timer setting overlapped with another setting
that has priority (page 67).
• Disc space was not enough.