Toshiba MW24FN3/R - Manual (Page 14)

14
Connections
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CATV), see page 15 for Cable TV connections.
Connect the 75 ohm Cable from the Combination VHF/UHF
Antenna to the Antenna Jack.
If your Combination VHF/UHF Antenna has a 300 ohm
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Connect the VHF 75 ohm cable and UHF 300 ohm Twin-
lead Wire to the Combiner (not supplied). Attach the
Combiner to the Antenna Jack.
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Trans-
former. Attach the Transformer to the Combiner, then
attach the Combiner to the Antenna Jack.
UHF 300 ohm
VHF 75 ohm
Antenna
Jack
Combiner
300-75 ohm
Matching
Transformer
UHF 300 ohm
VHF 300 ohm
Antenna
Jack
Combiner
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
Antenna
Jack
Antenna
Jack
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
5F10201C (E)p14-15 5/6/03, 16:50 14