Toshiba MW24FN3/R - Manual (Page 16)

16
Connections
Connecting to optional equipment
Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
You can enjoy the TV game, camcorder or high quality dynamic sounds of DVD video discs or audio CDs by connecting
the unit to optional audio equipment.
Connecting to an audio system
Signal flow
Connecting a camcorder or a TV game
Select “LINE 2” using the INPUT SELECT button.
Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away
from the tuner and radio.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
Connect the unit to your audio system.
PHONES L/MONO R REW PLAY FF REC/OTR CHANNEL OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP POWER POWER REC/OTR TIMER REC STOP/EJECT
LINE IN 2
VIDEO AUDIO
LINE 1 IN
VIDEO
AUDIO
L(MONO)
R
VIDEO
AUDIO
L
R
OUT PUT
DIGITAL AUDIO
VHF/UHF
COAXIAL
(white)
(red)
(red)
(white)
To ANALOG AUDIO OUT
To audio inputs of the amplifier
Audio system
To AUDIO (L/R)/VIDEO IN
(LINE IN 2)
To AUDIO (L/R)/VIDEO OUT
(red)
(white)
(yellow)
(red)
(white)
(yellow)
TV GAME
Camcorder
OR
Audio cable (not supplied)
Audio/Video cable (not supplied)
5F10201C (E)p16-18 5/6/03, 16:51 16