Toshiba MW24FN3/R - Manual (Page 40)

40
Recording (VCR)
Recording a TV program
Recording and viewing the same TV program.
Recording a TV program
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
1
00 : 00 : 00 SP
CH 110
+0
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
2
Select “TV” or “CATV” to the appropriate
position 26 .
3
TV - VHF/UHF channels
CATV - CABLE TV channels
Press Direct channel selection buttons or CH
/ to select the channel to be recorded.
4
Press both REC at the same time.
“ ” will appear on the screen for
about 4 seconds and the REC/OTR
indicator on the front panel will light.
5
Notes:
• If power is switched off during recording, the TV and the
DVD sections go off and the VCR continues to record.
Press the STOP button to halt the recording and turn off the
VCR.
• The unit channel cannot be changed during recording.
• If you record the TV program after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
0
8 7 9
6 5 4
3 2 1
REC/OTR
5
SP/SLP
RETURN
REC
2
4
TV/VCR
CHANNEL
5F10201C (E)p40-45 5/6/03, 16:52 40