Teac GR-7i - Manual (Page 22)

22
< The unit can be programmed to turn on
at a specified time. The unit will turn off
60 minutes after reaching the specified
time.
< Adjust the clock before setting the timer
(see page 14).
Setting the timer
Press and hold the ALARM button (1
or 2) for more than 3 seconds.
The clock blinks and the ALARM
indicator (
or ) appears on the
display.
< If no button is pressed for about 1
minute, the timer setting mode will be
canceled.
1
Press the TUNING/SKIP button (.)
to set the start hour, and press the
TUNING/SKIP button (/) to set the
start minute.
Select a source (iPod or RADIO) using
the WAKE button.
< You cannot select “AUX”.
Set the volume or select alarm high
or low using the TUNING/SKIP
buttons (.//).
The volume for timer operation is
adjustable from 10 to 40.
Press the ALARM button (1 or 2) to
enter the timer setting.
Setting the timer is now completed.
5
4
3
2
Timer
. / / ALARM1/ALARM2