Teac GR-7i - Manual (Page 23)

ENGLISH
23
To turn on the timer
After setting the timer, press the
ALARM button (1 or 2) to turn the
timer on.
The ALARM indicator ( or )
appears on the display.
Prepare the source.
When the source is set to “iPod” in step
on the previous page, insert an iPod.
When the source is set to “RADIO” in
step
on the previous page, tune in a
station.
Press the STANDBY/ON button to
turn the unit off (standby).
Don’t forget to turn the unit off
(standby), or the timer won’t work.
< Playback volume will gradually increase
up to your set volume when the unit is
turned on by timer.
3
3
3
2
1
< If the source is set to “iPod” but no iPod
is set, the unit will turn on into TUNER
mode.
< When the source is set to “RADIO” and
the unit turns on, it will tune in to the
station you selected last time.
To turn off the timer
When you don’t use the timer, press the
ALARM button (1 or 2) to turn it off.
The ALARM indicator ( or )
disappears from the display.
Press the ALARM button (1 or 2) again to
turn it on.
SNOOZE function
After the unit has been turned on by the
timer, press the SNOOZE/DIMMER
button, and the unit enters STANDBY
mode. After 10 minutes, the unit will
turn on again.
You can use this function repeatedly for
up to 60 minutes.
< Press the STANDBY/ON button or the
active ALARM button (1 or 2) once to
stop this function.
Note that if you press the ALARM button
twice, the timer is also turned off.
ALARM1/ALARM2 STANDBY/ON