Removing/replacing the vga video board (60x only), Removing/replacing the pcmcia connector module, 20 removing/replacing the pcmcia connector module – Texas Instruments 60X User Manual
Page 113
Field Service 6-29
6.5.19 Removing/Replacing the VGA Video Board (60X Only)
Use the following procedure to remove/replace the Motherboard Assembly:
1.
Remove the Motherboard Assembly as described in Paragraph 6.5.17.
2.
Remove the two screws securing the Video Board to the Motherboard and
remove the Video Board (refer to Figure 6-26).
3.
Replacement is the reverse of Steps 1 and 2.
.
Figure 6-26 Removing/Replacing the VGA Video Board
6.5.20 Removing/Replacing the PCMCIA Connector Module
Use the following procedure to remove/replace the PCMCIA Connector Module:
1.
Remove the Motherboard Assembly as described in Paragraph 6.5.17.
2.
Remove the Video Board Paragraph 6.5.19)
3.
Remove the four screws securing the PCMCIA Module to the Motherboard
Assembly (refer to Figure 6-27).