Toshiba TEC FS-3700 R4 Series - Manual (Page 46)

New Check Prompts Chapter 3 - Guest Check Functions
3-6 FS-3700 R4 Owner’s Manual
 Index the number of guests and press ENTER on the keypad.
3.2.3 Select Customer
 Select customer can be required for the Order Type by the PROMPT SEL CUST
flag in Order Type Setup.
 This setting requires that a customer must be selected from the database or
that a new customer must be inputted.
 Refer to the FS-3700 R4 Delivery Module Owner’s Guide for more details on the
Select Customer prompt.
3.2.4 Order Type
 All checks must be assigned to an Order Type. Most Job Codes will be assigned
a default Order Type. Or, the employee can be prompted to enter the Order
Type for each guest check.
 An Order Type can be required as an entry for a particular workstation.
 The DEFAULT ORDER TYPE in Job Code Setup for the employee’s Job
Code must be set to NONE.
 An entry for the Order Type must be completed before a menu item can be
entered on the check.
Procedure
1. Before entering a menu item, press an [ORDER TYPE] key for this check.
 Pressing
an [ORDER TYPE] key will also override a default Order Type
assigned to the Job Code for one order only.
3.2.5 Order Number
 Order numbers are also known as TENT numbers. They can be used when pre-
numbered order cards are given to guests to place on the table so food can be
delivered to the correct table.
 An Order Number can be required for checks by setting the Order Type
Setup\Options 1 USER ENTRD ORD# flag.