Trimble Outdoors AgGPS 332 - Manual (Page 12)

1 Introduction
2 AgGPS 332 GPS Receiver User Guide
1.1
Welcome
This manual describes how to install and configure the Trimble ®
AgGPS ® 332 receiver.
Even if you have used other Global Positioning System (GPS) products
before, Trimble recommends that you spend some time reading this
manual to learn about the special features of this product. If you are not
familiar with GPS, visit the Trimble website (
www.trimble.com ) for an
interactive look at Trimble and GPS.
1.2
About the Product
The AgGPS 332 receiver is an innovative GPS receiver that provides “the
ultimate choice” for Agricultural GPS positioning. Scalable accuracy
levels allow the option of SBAS (Satellite Based Augmentation System),
Beacon, OmniSTAR-VBS/XP/HP, and RTK (Real-Time Kinematic). The
AgGPS 332 can provide the level of accuracy needed for any operation.
1.3
Related Information
Sources of related information include the following:
• Release notes – the release notes describe new features of the
product, information not included in the manuals, and any
changes to the manuals.
• Trimble training courses – Consider a training course to help
you use your GPS system to its fullest potential. For more
information, go to the Trimble website at
www.trimble.com/training.shtml .
1.4
Technical Assistance
If you have a problem and cannot find the information you need in the
product documentation, contact your local dealer.
1.5
Your Comments
Your feedback about the supporting documentation helps us to
improve it with each revision. E-mail your comments to
[email protected].