Trimble Outdoors AgGPS 332 - Manual (Page 58)

5 Configuring the Receiver
4 8 AgGPS 332 GPS Receiver User Guide
3. Set the EZ Sat: Omni* field to the area you are operating in. For
example, if you are working in California, select N. America West.
4. Press 4 then 5 to complete the procedure.
5. Obtain an OmniSTAR licence from OmniSTAR. All licenses are
activated over the air. Contact OmniSTAR on 1-888-883-8476
(USA or Canada) and provide the following details:
– your billing information
– serial number
– satellite beam name
OmniSTAR will activate the receiver. Activation can take 5 to
30 minutes.
50.1
WAAS/EGNOS
WAAS is a free satellite-based DGPS service that is available only in
North America; EGNOS is a free satellite-based DGPS service that is
available only in Europe.
To use the WAAS/EGNOS DGPS signal, you must first configure the
receiver.
1. From the Home screen, select Configuration / DGPS Config.
2. Set the Source Select field to WAAS.
3. Press 4 then 5 to complete the procedure.