Toshiba e-STUDIO 170F - Manual (Page 110)

108
The Group Broadcast Trans-
mission feature allows you to
send a document to multiple
remote parties in a single oper-
ation.
Note that a Group Broadcast
Transmission requires all pag-
es to be scanned to memory
prior to dialing, and thus ade-
quate residual memory is re-
quired.
NOTES:
• Up to 50 groups can be
assigned.
• To confirm the Group
Number Registration,
see the Group Number
List. (See page 199.)
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Press the One Touch Key pro-
grammed for the desired group. Enter the Multi-address Trans-
mission Group Number (1 to
1999).
EXAMPLE:
To enter the Group Number
0001, press:
(Leading zeros, if any, may
be omitted.)
NOTES:
• When an incorrect num-
ber is entered, use
to delete the preceding
digits, or press
STOP
once to start over from
the beginning.
• Any leading zero (0) can
be omitted from the Ab-
breviated Dial Number.
When the correct Group Num-
ber is displayed, press:
START
ADVANCED FUNCTIONS - MULTI-ADDRESS TRANSMISSION (BROADCASTING)
Group Broadcast Transmission
Load the Document 1 Select the Group
Location 2 Enter the Group
Number 3 Press the START
Key 4
Standby Mode screen
Or, display the Group Dial Di-
rectory by pressing:
SPEED DIAL
ALPHA
+
When document scan-
ning is completed:
After 2 seconds:
Standby Mode screen
When document scan-
ning is completed:
JAN-31 09:43 AM 100%
AUTO RECEIVE
ONE TOUCH = 05
COLORADO GRP
SCANNING DOC. P001
FILE NBR = xxx
GROUP NBR =(1-1999)
[ ]
GROUP NBR =(1-1999)
[ 1]
GROUP NBR = 0001
COLORADO GRP
SCANNING DOC. P001
FILE NBR = xxx