Toshiba e-STUDIO 170F - Manual (Page 115)

113
Relay Transmission Originating Procedure - continued
Enter the password to access
the Relay Box.
Then press:
Enter the facsimile number of
the remote hub unit using any
of the following dialing meth-
ods.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
The facsimile starts scanning
the document into memory.
The following screen is dis-
played for about 2 seconds be-
fore returning to the Standby
Mode.
Enter the Password 6 Dial the Remote Hub
Unit 7 Complete the
Procedure 8
If the relay station is a pass-
word is programmed, press:
Go to Step 6.
If the relay station is not a
password is programmed,
press:
Go to Step 7.
Select the Password
Option 5
SEND(RELAY)
ENTER FAX NUMBER
TEL NUMBER=(MAX128)
[123 ]
SCANNING DOC. P001
FILE NBR= 231