THB Bury LT 9100 - Manual (Page 14)

24
Menu navigation
25
If the display reads Record is similar to existing one, distinguish
the new voice tag from the existing one by, for example, also stating
the first and last name of the contact.
Once the voice tag has been recorded successfully, you can listen to the
voice tag using the function of the Voice dial submenu. For this, confirm
Play tag.
In the main menu, you can set the volume of the recorded voice tag,
namely by going to Setup, Audio, Volume, Voice-tag volume.
Note:
The voice tag will only be recorded if you have stored the
corresponding entry in the internal phone book. Voice
tags cannot be stored in the external phone book.
You can use the voice dial function by means of the stored voice tag. If
the screen saver is displayed, you can voice dial by pressing and holding
the call answering key for approx. 3 seconds until the display reads Tell
voice tag. Say the required name into the microphone of your HFCK
from the UNI System 8. The phone is now connecting. When using the
voice dial function and the device displays the message Unrecognised
voice tag or Error recognising voice tag, repeat recording.
Note:
Please note that the stored voice tag and the use of the
voice dial function depend on the respective user’s voice.
The function will only work properly if the voice tag and the
voice dial were recorded and spoken by the same person.
Sometimes the voice tag recording is made at a too low or too high
volume depending on the background noise within the cabin. Repeat
the voice tag recording according to the instructions.
Note:
If a voice dial function is available with your mobile, ple-
ase note that the mobile phone voice dial cannot be applied
to the Twin-Phone. This is not possible as the voice tags are
stored in the mobile memory yet not on the SIM card.



14.2 External phone book
This second menu of the phone book, which can be opened with the
OK key, allows you to access the data stored on your SIM card. The
external phone book will be active as soon as a SIM card is inserted
into the Twin-Phone card slot or the SAP profile is activated.
Note:
The mobile phone book cannot be accessed. In order to
store entries on the SIM card, select your SIM card as the
storing location for phone book contacts in the settings
menu of your mobile. The Twin-Phone is otherwise not able
to access the entries.
In HF profile, the external phone book is not active.
If the external phone book can be accessed and if you select this
using the OK key, up to 500 contacts stored on the SIM card will be
displayed in alphabetical order. The number of the entries stored on
your SIM card depends on the network operator. If a network operator
offers SIM cards with a capacity of 1000 entries, the Twin-Phone will
only show the first 500 contacts of the external phone book.
In the following, you will find a summarised listing of frequently used
functions as the external phone book is analogue to the internal
phone book:
Use the call answering key to establish a connection to the phone of the
contact saved in the list. You can open contacts by pressing the OK key.
The corresponding submenu with four options for this phone book ent-
ry will be displayed after pressing the shift key. Voice dial for entries
stored in the external phone book is not available.

