THB Bury LT 9100 - Manual (Page 6)

8
Device description and installation
9
Pairing the steering wheel remote control
The Twin-Phone is normally paired to the supplied SWRC when it leaves
the factory. This means that both devices each detect the identifier si-
gnal of the other device. If this is not the case, pair the devices as fol-
lows with enabled ignition:
On the SWRC, press the ESC and the information key at the same time
(keys 3 and 7), see picture 8. Then place the Twin-Phone in the hang-
up cup of your HFCK. The display will now show ‘BURY TECHNOLO-
GIES’, i.e. the initialising process is now running. Once the initialisation
has been successfully completed, the screen saver is displayed.
Now release keys 3 and 7 of the SWRC and press the shift key to open
the main menu of the Twin-Phone. If this is not possible, the device and
the SWRC have not been paired correctly. Please repeat the pairing
procedure as described above.
7.2 Key functions
Call answering key
For answering incoming calls.
In standby mode: press key once to access the submenu last Dialled
numbers. You can activate the voice-dial function by pressing and
holding this key.
In the menu: confirm new entries created using the number keys.
Call termination key
Reject incoming calls or end a call.
In the menu: press key to confirm after selecting a function by highligh-
ting the respective item with OK key.
Shift key
Accessing the main menu while the screen saver is activated.
In the individual submenus: access to options such as Clear list in the
Dialled numbers submenu.
Phonebook entries or SMS: shift between scroll keys and number
keys.
In standby mode: enabling and disabling the silent function by holding
this key.
OK key
Confirming a selection (if such was not entered via the number keys).
Scroll keys
In the menu: scroll function, from above downwards and from left to
right.
Number keys
Enter numbers and write SMS.
Volume control
In standby mode: press this key once for setting the Ring tone volu-
me, twice for setting the Voice-tag volume, three times for setting
the Talk volume. Turn the control upwards and/or downwards to turn
up and/or down the volume.
When calling: press key once for setting the Talk volume, twice for
setting the Ring tone volume, three times for setting the Voice-tag
volume.
7.3 Creating contacts and SMS
You can save entries in the internal and external phone book as
well as Write SMS using the number keys of the SWRC. The keys 2 to
9 also display letters, which can be entered by pressing the required
key. The first letter (from left to right) can be entered by pressing the
respective key once, the second one by quickly pressing the key twice
and so on.
In the left bottom corner of the display, the icon for the number keys of
the SWRC is displayed when creating phone book entries or writing an
SMS, i.e. the number keys are enabled and you can enter the required
letters.
The call termination key can be used for deleting an entered letter
and/or text. The respective last letter to the left of the cursor will then
be deleted. If you want to delete or insert a letter located elsewhere,
press the shift key in order to enable the scroll keys (the icon in the left
bottom corner will now show the arrows indicating the four possible
directions instead of the number keys). You can now position the cursor
anywhere in the entered name and/or the SMS text using the scroll
8.