THB Bury LT 9100 - Manual (Page 19)

34
Menu navigation
35
System settings
Five options are available: Date and time, Turn-off time, Telematic
keys, Default and Version Info.
Date and time
Here, you can set the date displayed in the first line. Use the scroll keys
2 and 8 to select the respective data in ascending or descending order
for the day, month and year. Press and hold the scroll key to scroll fas-
ter. With the scroll key 6, you can move the cursor in each line from left
to right and then to the next line.
In the second line, you can select the Date format. You have two
options: yyyy/mm/dd (for year/month/day) and dd/mm/yyyy (for day/
month/year). Make your selection with the scroll keys 2 and 8. Press the
scroll key 6 for moving to the next line.
You can then set the Time – please follow the steps described in the
Date and time section.
In the fourth line, you can select the time format (12 or 24 hours).
Confirm all settings with the OK key to complete.
Turn-off time
Here, you can choose whether and after what time the Twin-Phone is
to switch off automatically when you have turned off the engine of your
vehicle and leave the Twin-Phone in the hang-up cup of your hands-free
car kit.
Note:
Please note that the vehicle’s battery will be continuously
discharged as long as the Twin-Phone is switched on.
Press the call termination key to confirm your selection.
Telematic keys
The two black keys of the Twin-Phone just below the display are the
telematic keys. These are speed dial keys to which you can allocate one
phone number each.
If you press and hold one of these keys, a connection is automatically
established to the phone, whose number was allocated to this key. The
left key is marked with a white i and can be used as speed dial key, e.g.
for an info number. The right key shows a white spanner and could, for
example, be used for speed dialling a service number.
The Default submenu does not comprise numbers for the speed dial
function of the two telematic keys.

Change allocated numbers
If you open the telematic keys submenu with the OK key, you can
choose from two speed dial options: Edit info number and Edit ser-
vice number. After having confirmed your selection with the OK key,
you can enter the required number. Press the call termination key to
confirm your selection.
Emergency calls
If you press and hold the two telematic keys simultaneously for ap-
prox. 3 seconds, a connection to the emergency services (112 in Ger-
many) is established. Use this number only in case of emergency (the
emergency telephone number is stored in Default).
Default
If you want to reset your Twin-Phone to Default, open the Default
submenu. If you want to terminate this process, press the call termina-
tion key. Upon confirmation with the OK key, System restart will be
displayed. The device will automatically switch off and restart. In doing
so, the original settings are restored for certain menu items. The Twin-
Phone and the SWRC must be re-paired after each restart.
Version Info
This contains the manufacturer’s address as well as the hardware (HW)
and software (SW) version codes of the Twin-Phone for possible inqui-
ries with the manufacturer. Press the call termination key to quit this
submenu.