Callmaster 250 – Topcom CALLMASTER 250 User Manual
Page 33
Callmaster 250
34
34
34
34
34
1
Installation
35
2
Description
35
3
Settings
36
3.1 Select language
36
3.2 Setting Date and Time
36
3.3 Set the area code and the area prefix
37
3.3.1 Set the area code
37
3.3.2 Set the area prefix
37
3.3.3 Use of the area code and the area prefix
37
3.4 To set the handset
38
3.5 To set the warning signal New Messages
38
4
Operation
39
4.1 Announcement of incoming calls
39
4.2 Handset Operation
40
4.2.1 You want to be connected with the caller
40
4.2.2 You don‘t want to be connected with the caller
40
4.3 To check calls
40
4.4 To record a name
41
4.4.1 Add a name to a number in the call list
41
4.4.2 Add a name to a pre-programmed number in the call list
41
4.5 To add a recorded name to different numbers
42
4.6 To check a name
43
4.7 To record an outgoing message (OGM) for a particular caller
43
4.7.1 To record an outgoing message (OGM)
43
4.7.2 To select an outgoing message
43
4.8 To check the outgoing message (OGM)
44
4.9 To adjust the volume
44
4.10 To erase calls
45
4.10.1 To erase one call
45
4.10.2 To erase all calls
45
4.11 Call back
45
4.12 To set default settings (reset)
45
4.13 Voice mail
46
4.14 Solving problems
46
4.14.1 The Callmaster 250 doesn’t respond properly to commands
46
4.14.2 The unit doesn’t announce any calls
46
4.14.3 The call back function doesn’t work properly
46
5
Warranty
47