Topcom CALLMASTER 250 - Manual (Page 35)

Callmaster 250
36 36 36 36 36
3 SETTINGS
After having installed the Callmaster 250, you have to carry out the
following settings:
3.1 Select language
• P ress and hold the Mode/Call button and then press the Set button.
The display shows “ RESET VXXX”.
• Press the Mode/Call button again. The display will show
“Nederlands” (default language). To change the language, press
the Set button.
• When finished, press the Mode/Call-toets.
Note : This unit has 3 languages : Dutch, French and German.
3.2 Setting Date and Time
The unit automatically sets the date and time when a call comes
in (for the FSK system only). The date and time are sent by the
telephone provider, along with the Caller-ID information. This
depends on the services offered by your telephone provider. In
certain countries the date and the time have to be set manually
when the batteries are being replaced.
On the display appears : " DD/MM HH:MM "
• Press the Set button to change the setting.
• Press the Up and Down buttons to move the cursor.
• Repeat steps 1 and 2 to enter all 8 digits.
• Press the Mode/Call button to confirm; the unit goes to the next
setting : ‘Set the area code’.