Aco volume control, Microphone, Aco volume control microphone – Toshiba CTX IPT/DKT User Manual
Page 100
Advertising

IPT2010-SDC
ACO Volume Control
82
Strata CIX and CTX IPT/DKT Telephone 08/07
ACO Volume Control
To adjust the handset/headset volume
Press the
Vol
to increase volume and
Vol
to decrease volume during the
ACO call.
To adjust the Speaker Receiver Volume
Press ACO button in On-hook Mode, then press Volume Up/Down button to
change the Speaker Receiver volume level.
To adjust ACO Ringing volume
There are two ways to adjust ACO ringing volume:
1. When the ACO button is ringing, press the
Vol
to increase volume and
Vol
to decrease volume.
2. When the IPT is idle, press
Hold
, then
Vol
to increase volume and
Vol
to
decrease volume.
Microphone
Important!
Use only the Handset in ACO mode; Microphone is not available for
ACO conversations in Speaker mode.
Advertising