Disconnecting, Wireless communications, Wireless lan – Toshiba M400 User Manual

Page 127: Disconnecting -43, Wireless communications -43, Wireless lan -43

Advertising
background image

User’s Manual

4-43

Operating Basics

Disconnecting

To disconnect the internal modular cable, follow the steps below.

1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer’s modem jack in the same

manner.

Wireless communications

The computer’s wireless communication function supports both Wireless
LAN and Bluetooth devices.

All models are provided with Wireless Communication switch. Some
models are equipped with both Wireless LAN and Bluetooth functions.

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct
Sequence Spread Spectrum /Orthogonal Frequency Division Multiplexing
radio technology that complies with IEEE802.11 Wireless LAN standard
(Revision A, B or G).

Theoretical maximum speed: 54Mbps (IEEE802.11a, 802.11g)

Theoretical maximum speed: 11Mbps (IEEE802.11b)

Frequency Channel Selection (Revision A: 5 GHz, Revision B/G: 2.4
GHz)

Roaming over multiple channels

Card Power Management

Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
encryption algorithm.

Wi-Fi Protected Access (WPA).

Advanced Encryption Standard (AES) data encryption.

Wake-up on Wireless LAN (Intel module type).

Do not install or remove an optional memory module while Wake-up on
Wireless LAN is enabled.

The Wake-up on Wireless LAN function consumes power even when
the system is off. Leave the AC adaptor connected while using this
feature.

The Wake-up on Wireless function is effective only when it is
connected with Access Point. This function becomes invalid when the
connection is cut.

Advertising