Toshiba M400 - Manual (Page 216)

9-14 User’s Manual
Troubleshooting
USB mouse
Fingerprint Sensor
Problem Procedure
On-screen pointer
does not respond to
mouse operation The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Double-clicking does
not work Try changing the double-click speed setting in
the mouse control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
icon.
2. Within the Mouse Properties window, click
the Buttons tab.
3. Set the double-click speed as required and
click OK.
The mouse pointer
moves too fast or too
slow Try changing the speed setting in the mouse
control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse
icon.
2. Within the Mouse Properties window, click
the Pointer Options tab.
3. Set the pointer speed as required and click
OK.
The mouse pointer
moves erratically The mouse might be dirty. Refer to your mouse
documentation for instructions on cleaning.
If problems persist, contact your dealer.
Problem Procedure
Reading of the
fingerprint was not
successful. Please try again using the correct posture. Align
your fingertip with the sensor as shown in the
drawing and swipe. Refer to
Using the
Fingerprint Sensor in Chapter 4, Operating
Basics.
Try the recognition process again using another
enrolled finger.