Uniden EXAI 7248 - Manual (Page 33)

T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 3 2 ] w w w . u n i d e n . c o m
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/
clock key.
The system announces “Time,” the current time and the
guidance for setting the time.
2) Press the or /volume/select key until the correct
day is announced. The numbers [ ] through [ ] are
displayed on the base.
3) Press the set key to select the day.
4) Press the or /volume/select key until you hear
the correct hour setting. The numbers [ ] through
[
] are displayed on the base.
5) Press the set key to select the hour.
6) Press the or /volume/select key until you hear
the correct minute setting.
The numbers [
] through [ ] are displayed on the
base.
•Normally, the system
will return to standby
if it remains idle for 10
seconds after the
or
/volume/select
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
•Press and hold the
or /volume/select
key to quickly scroll
through the numbers
on the display.
note
TH
E I
N
TE
G
R
A
T
ED
ANS
WER
I
NG D
E
V
I
CE
EXAI7248.book 32 ページ ２００４年１月１５日 木曜日 午前１１時５６分