Changing the digital security code – Uniden EXAI 7248 User Manual
Page 51
A D D I T I O N A L I N F O R M A T I O N [ 5 0 ]
w w w . u n i d e n . c o m
A
DDI
T
I
ONA
L
IN
FO
R
M
A
T
IO
N
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone provides AutoSecure
TM
(which electrically locks your phone
when the handset is in the base) and Random Code
TM
digital security which automatically selects
one of over 262,000 digital security codes for the handset and base.
If the handset battery pack is completely discharged or the battery pack is removed, the digital
security code will be lost. If this happens, a new security code is set automatically the next time
the battery pack is charged. In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit and leave the handset in
the base for more than 3 seconds. A new random security code is set.
EXAI7248.book 50 ページ ２００４年１月１５日 木曜日 午前１１時５６分