Uniden EXAI 7248 - Manual (Page 40)

[ 3 9 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E w w w . u n i d e n . c o m
Setting the Base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume
levels. You can change the ringer volume while in standby mode or the incoming call is ringing.
1) Press the ringer key.
You hear the ringer at the current volume level ([ ]
high, [ ] low, [ ] off) (if you set the base ringer
volume to off, " Ringer off " is announced) and it is
displayed on the base.
2) Press the ringer key repeatedly until the desired ringer
option appears.
3) The system displays the new ringer volume.
Temporarily Mute the Base Ringer and Call Screen
Press the (play/stop) key to temporarily mute the incoming ring and call screen. The
ringer will sound with the next incoming call. To turn the ringer back on for this call, press
the ringer key. To hear the answering machine and screen this call, press the
or /volume/select key.
Adjusting the Speaker Volume Level
You can adjust the volume of the base speaker by pressing the or /volume/select key
on the base. Press the /volume/select key for louder or the /volume/select key for
softer while the base speaker is being used except for menu mode. The numbers [ ] -[ ]
are displayed on the base indicating the volume levels. [ ] being the softest and [ ] being
the loudest.
Although you have set
the base ringer to off,
you will still hear the
ringer from the handset
on the base if its ringer
is on.
note
TH
E IN
TE
G
R
A
T
ED
AN
S
W
E
R
I
N
G
DE
VI
CE
EXAI7248.book 39 ページ ２００４年１月１５日 木曜日 午前１１時５６分