Ultratec 43FDX10B - Manual (Page 25)

25
PICTURE-IN-PICTURE (PIP)
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory. (see pages
38 and 39)
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANT A is selected as the main channel.
4. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated.
5, Closed Caption will not appear when PIP SURF mode is on.
NOTES: 1. The SWAP button will only operate in SINGLE PIP mode.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
a sub-picture.)
PICTURE-IN-PICTURE CONT.
SURF MODE PIP
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along
the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen.
ባ
SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
Ant A 28
Ant A 10
Video: 1
Video: 1
Ant A 10
Ant A 10
Video: 1
09
10
12
ቤ
PIP MODE button
To change between the two different PIP modes (SINGLE or SURF) press the PIP MODE button when PIP is ON. Each press
of this button will change PIP to a different mode. Pressing this button two times will cycle through both PIP modes.
SINGLE
PIP
PIP
SWAP
Ant A 10
Video: 1
PIP MODE
Ant A 10
Video: 1
PIP MODE
NOTES: SURF mode PIP is only allowed when ANT A is the main picture.