UMAX Technologies Mirage II - Manual (Page 32)

25
Appendix B: Scanner Specifications
Scanner Type Flatbed
Interface Built-in SCSI II, two 50-pin connectors
Scan Speed 131 sec. / A3 (700dpi) in color mode
261 sec. / A3 (1400dpi) in Color mode
Preview Speed 22 sec. / A3 (700dpi) in color mode; 22 sec./ A3
(1400dpi)
Maximum Scannable Area Low power lens 11.4" x 17"
High power lens 5.7' x 17"
Optical Resolution 700 x 1400dpi / 1400 x 2800dpi
Output (H/W) Resolution 700 x 1400dpi / 1400 x 2800dpi
Maximum Resolution 9800 x 9800dpi / 9800 x 9800dpi
Scanning Density 1 dpi to 3200dpi
Color Scanning Method One pass with color CCD
Sample Depth
Color Mode 24/36 bits/pixel
GrayScale Mode 8/12 bits/pixel
Lineart mode 1 bit per pixel
Scanner Settings
Scaling 1% to 1600%/1200% in 1% increments at 700/1400 dpi
Highlight/Shadow 255 steps
Contrast/Brightness -100% ~ +100%
Gamma Curve Downloadable Curves
Data Output
Color Mode 36 bits (hardware) /24 bits (system)
Grayscale Mode 12 bits (hardware) /8 bits (system)
Power Requirements
Voltage 100 ~ 240 VAC
Frequency 50-60Hz
Power Consumption Maximum 60 Watts
Environmental Range
Operating Temperature 10°C ~ 40°C
Relative Humidity 20% ~ 80%
Other Specifications
Noise Under 60 dB (Operating)
Dimensions 730 mm x 528 mm x 134.6 mm (for scanner)
637 mm x 456 mm x 63 mm (for Transparency Adapter)
Net Weight 19 Kgs (for scanner)
7Kgs (for Transparency Adapter UTA-MII)
Systems Supported PC and Macintosh computers
Options Transparency Adapter UTA-MII
Note: Specifications are subject to change without prior notice.