UMAX Technologies Mirage II - Manual (Page 7)

vii
8. Software Installation
We recommend that you install your image editing software first. Then, MagicScan.
a) Insert UMAX MagicScan CD into your CD-ROM drive.
b) Win95 users - click on the Start button and click on Run…
Win3.1/NT users - you can access Run… by clicking on the File menu in
Program Manager and then click on Run…
In the Run dialog box, type d:\setup. If your CD-ROM drive is designated by
another drive, please type the appropriate letter in the Run dialog box.
c) Mac users - Double-click on the MagicScan installer icon to start installation.
Follow the on-screen instructions to completely install MagicScan.
About this manual
This manual is divided into chapters and appendices. The chapters give instructions on
all aspects of installation, troubleshooting, and basic scanner maintenance. The
appendices contain relevant technical information for your reference.
Chapter 1 gives instructions and tips on scanner preparation, handling and
routine scanner maintenance.
Chapter 2 gives instructions on scanner connection to a Macintosh computer
and the corresponding software installation.
Chapter 3 gives instructions on scanner connection to an IBM PC compatible
and the corresponding software installation.
Chapter 4 gives troubleshooting tips for possible problems with the scanner.
Appendix A gives instructions for installing an ASPI-compatible interface card.
Appendix B lists specifications for the scanner.
A Glossary and an Index are also included for easy reference.