UNICOM Electric FEP-30109T-C-SM User Manual
Page 17
Smart-Switch/801
16
Figure 4-7. The process of creating VLAN group
Continue to configure the other ports with another VLAN group. In the
following example, we create three VLAN groups (VLAN 1: Port 4, 5, 6;
VLAN 2: Port 1, 2, 3, 4; VLAN 3: Port 4, 7, 8, 9) and the 4
th
port may be
connected to an MIS member.
Restore Factory Setup
If you make a mistake while setting up any of the menus, you can easily
restore the switch setting to the factory default by selecting the main
menu, choosing the 3
rd
item, “Restore Default Setup”, by typing “3”. The
switch will reset to the original factory settings.
Reset Device
If the switch performs improperly or if you want to reboot the switch, go
back to Main Menu and select the 4
th
item by typing “ 4 “ to reboot the
Switch.