Manually programming racing systems, Editing the car – Uniden SC230 User Manual
Page 49
49
Programming Radio Systems
Manually Programming Racing
Systems
Program SysteM
E
New System
E
Racing
E
Confirm?
E
The scanner creates an empty conventional system, with a
default name of System nnn R. nnn increments as you
add new systems. R indicates that this is a racing system.
Refer to the appropriate section to set system-wide options:
• See “Editing the System Name” on Page 55
• See “Setting System Lockout” on Page 56
• See “Setting the System Hold Time” on Page 56
• See “Setting the Channel Delay Time” on Page 57
• See “Setting Data Skip” on Page 57
• See “Deleting Systems” on Page 58
• See “Copying Systems” on Page 58
Editing the Car
Program SysteM
E
Select the system
E
Edit Car
E
Select the car
E
Follow these steps to enter the car options.
1. Press 0-9 to enter the car’s number, then press E.
2. Rotate the scroll control to select one of the following
options. Then refer to the appropriate section to set
or change a car setting.
• See “Entering/Editing a Car Number” on Page 50.
• See “Editing a Driver” on Page 50.
• See “Setting a Car’s Quick Key” on Page 51.
• See “Editing a Car’s Channel” on Page 51.
• See “Deleting a Car” on Page 51.
• See “Setting Lockout On A Car” on Page 52.
Menu
Menu
SC230 Paper OM.fm Page 49 Wednesday, October 6, 2004 10:51 AM