Entering/editing a car number, Editing a driver – Uniden SC230 User Manual
Page 50
50
Programming Radio Systems
Entering/Editing a Car Number
Program SysteM
E
Select the system
E
Edit Car
E
Select the car
E
Edit Car No
E
1. Rotate the scroll control to select the first digit, then
press 0-9 to enter the correct digit.
2. Repeat Step 1 to enter or correct the second and third
digits if necessary, Then press E
or press down on
the scroll control to accept the setting.
Hints:
• Each car number can be up to three digits.
• Press
to
delete
the entire car number.
Editing a Driver
Program SysteM
E
Select the system
E
Edit Car
E
Select the car
E
Edit Driver
E
1. Rotate the scroll control to select the first letter.
2. Press and hold down
then rotate the scroll
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
driver’s name. Then press E
or press down on the
scroll control to accept the setting.
Hints:
• Each driver’s name can be up to 12 characters.
Abbreviate as necessary to fit.
• Press twice to delete the current character.
• Press three times to clear the entire driver name.
Menu
Menu
Func
SC230 Paper OM.fm Page 50 Wednesday, October 6, 2004 10:51 AM