Uniden SC230 - Manual (Page 96)

96
Preprogrammed Systems
Preprogrammed Sys- tems
Your scanner is preprogrammed with frequencies used at
races within the NASCAR Nextel, Busch, Craftsman,
Indy, ARCA, and Champ racing series. One racing
system and one conventional system are preprogrammed
for each race.
By default, all of the preprogrammed conventional
systems and one of the racing systems are unlocked, and
your scanner begins to scan them when you turn it on. To
speed up scanning, you can lock out systems that are
beyond your reception area (typically no more than a few
miles using the supplied stub antenna).
Follow these steps to lock out systems:.
1. Press and hold
.
2. While continuing to hold , rotate the scroll control
to select a system you want to lock out.
3. While continuing to hold , press L/O to lock out
the system.
4. Repeat Steps 2, 3, and 4 to lock out additional
systems.
The preprogrammed systems provide a starting point;
you will want to find out more information about your local
radio systems so you can customize the programming to
better suit your listening preferences.
Notes:
• You might hear transmissions on frequencies assigned
to very distant stations. This will happen if a local
system also uses the same frequency. Disregard the
text tag for these transmissions (e.g. if you are in
California, you aren’t really receiving Florida
transmissions even if the scanner displays
Dade County
).
• To free up memory, you can delete systems that you
will not be monitoring. Refer to “Deleting Systems” on
Page 58.
• Data used for the preprogrammed information was
supplied courtesy of http://www.radioreference.com ,
the Internet’s premier scanning resource
(RadioReference is not affiliated with Uniden America
Corporation).
Func
Func
Func
Preprogrammed Systems
SC230 Paper OM.fm Page 96 Wednesday, October 6, 2004 10:51 AM