Uniden BC250D - Manual (Page 13)

9
Feature Highlights
• Trunk Tracking – Follow VHF High Band UHF
800/900MHz trunked public safety and public service
systems just as if conventional two-way communications
were used.
• Digital Capable – With the APCO 25 Digital card (BCi25D)
installed, you can monitor supported project 25 systems.
• Multi-Track – Track more than one trunking system
at a time. Scan conventional and trunked systems at the
same time.
• 1000 Channels – Program one frequency into each
channel. You must have at least one channel programmed
to use the Scan mode.
• 27 Bands – Includes 27 bands, with aircraft and 800 MHz.
• 10 Banks – 10 banks with 100 channels each are useful for
storing similar frequencies to maintain faster scanning
cycles or for storing all the frequencies of a trunked system.
• 25 MHz-1300 MHz – Indicates the range of frequencies that
can be searched within the bands of your scanner.
Note: The frequency coverage is not continuous and
excludes the cellular band, 512-806MHz.
• 10 Priority Channels – You can assign one priority
channel in each bank. Assigning a priority channel allows
you to keep track of activity on your most important
channel(s) while monitoring other channels for
transmissions. You can also assign Trunking priority
Talkgroups.
• Priority Plus Scan – Allows you to scan only priority
channels.
• Preprogrammed Service Search – Allows you to toggle
through preprogrammed public safety, news media, TV
broadcast audio, Ham, CB, FRS, special low power,
railroad, aircraft, marine, racing, and weather frequencies.
• Unique Data Skip – Allows your scanner to skip unwanted
data transmissions and reduces birdies.
• Memory Backup – If power is disconnected, the
frequencies programmed in your scanner are retained
in memory.
• Direct Channel Access – Go directly to any channel
without entering the Menu mode.
• Attenuator – Reduces the signal strength on a per
frequency basis.
BC250D 11/6/2 11:36 AM Page 9