Uniden BC250D - Manual (Page 59)

ID Scan Mode
1. Press SCAN to begin scanning the
lists you have programmed.
If you haven't programmed more than
2 IDs, ERROR appears on the display.
2. To remove a Scan List from active scanning, press the
number of the Scan List on your keypad.
Hint: Press and hold RSM for 2 seconds, the scanner will
move to the next trunking bank.
The Scan List indicator turns Off, and the IDs in that list
are not scanned.
Note: One Scan List must always be active. If you try and
deactivate all the Scan Lists, Scan List 1 will
automatically be active.
3. To restore a Scan List to active scanning, press its
number again.
4. Press SEARCH to return to Trunk Tracking Search mode.
☞ Remember! When you press and hold TRUNK for 2
seconds, you can switch Trunk Tracking modes (Scan or
Search).
Note: • While ID scanning, to change all trunking banks to
the Service Search mode, press SERVICE.
• Selecting a Scan List is also possible in the Menu
mode. (LTR only)
• ID SCAN appears on the display during Trunk
Scan instead of simply SCAN.
55
ID SCAN
867.9875 NFM
List 1234567890
BC250D 11/6/2 11:37 AM Page 55