Uniden BC250D User Manual
Page 32
Transfer Frequencies
You can transfer a frequency that has been stored in a
channel to another channel.
1. Press HOLD/MAN.
2. Press TRANSFR, and the smallest empty channel number
along with the frequency will flash on the display.
3. Press E and the frequency can be stored in this channel.
4. If you want to enter it into another channel, select another
channel by rotating the VFO and pressing E.
Note: When the frequency is transferred, channel data along
with the frequency is also transferred. For trunked
frequency, data related to trunking, such as Trunk
Type or Fleet Map will not be transferred. You will
need to input the data manually.
Storing Text Tags
You can customize your scanner by storing text tags for easy
identification of banks, channel transmissions, trunking
talkgroup IDs, etc. The text tags can be set at the Menu
mode. (Refer to “Understanding the Menu System” on page
16.)
For programming text tags for trunked talk group ID’s, please
refer to page 53.
Assigning a Bank Tag to a Bank
1. Press MENU/BACK.
2. Select 3:SYSTEM OPTION / 9:BANK TAG by
rotating the VFO and pressing E.
3. Select the bank number by rotating
the VFO and pressing E.
4. The cursor appears on the display.
Scroll the VFO to change the letters,
and then press HOLD/MAN or RSM
to move right or left. Both capital and
lower case letters are available, as
well as numbers and punctuation
marks.
5. After entering the desired text, press E.
Assigning a Text Tag to a Channel
1. Press MENU/BACK.
2. Select 2:SCAN OPTION / 1:CONVENTIONAL by
rotating the VFO and pressing E.
28
BANK TAG 1
Uniden Group
BANK TAG 1
BC250D 11/6/2 11:36 AM Page 28