Ultra electronic MAGICARD 300plus - Manual (Page 40)

Quick Start Guide Ultra Electronics Card Systems
Page 40 MAGICARD Color Printer
The MAGICARD printer has extensive error trapping facilities, to
provide the operator or service agent with fault diagnosis
information.
ON LINE and ERROR Indicator Flashing
The ON LINE indicator flashing indicates that the printer is receiving and processing a file of
image data.
If the ERROR indicator is also illuminated continuously, it indicates that the file of image data
is incomplete and that the printer is waiting for the rest. If this need cannot be met (perhaps
the PC develops a fault or is reset), then the printer must be rebooted by switching off then on
again. Ensure that any files in the Windows Spooler are aborted first.
If the ERROR indicator is also flashing this condition indicates an error in the file downloaded
from the PC and the printer must be powered down. To ensure that the error will not repeat
after reset, abort the transfer on the PC before resetting the printer by opening and closing the
lid.
DYE FILM Indicator On
This indicates that the dye film has run out, the wrong film has been fitted with respect to the
Driver settings or the film is jammed.
MEDIA OUT Indicator On
This indicates either the card hopper is empty or a card is jammed in the mechanism.
MEDIA OUT Indicator Flashing
This indicates that the printer is in hand fed mode and is waiting for the operator to manually
insert a card through the front aperture.
PRINTING Indicator Flashing
This indicates that the printhead is too hot. The printer waits for it to cool down before
Continuing with the print. If it does not cool down within about 60 seconds, the printer will
indicate an ERROR as described below.
ERROR Indicator Flashing
This indicates a system hardware fault. The indicator will flash a number of pulses, pause,
and then repeat. The number of flashes indicates the cause of the error. Note the number of
flash pulses and contact your service agent.
ERROR and PRINTING Indicators Flashing
This indicates a system hardware fault. The indicators will flash a number of pulses, pause,
and then repeat. The number of flashes indicates the cause of the error. Note the number of
flash pulses and contact your service agent.
LED Error
Codes
N