Uniden XSR917/918 - Manual (Page 18)

SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the phone's channel for clear
operation. This function works only when the phone is in use.
Press /channel (for XSR918) or /channel (for XSR917). ' appears on the display, indicating the
phone is changing to another channel.
Scanning'
FIND HANDSET
CALL WAITING/FLASH
If the call waiting tone sounds during a call:
Press /flash, then to switch between callers.
Press /flash to switch between callers.
AUSTRALIA:
NEW ZEALAND:
Page 10
USING
YOUR
PHONE
You must
subscribe
through your
local telephone
company to
receive Call
Waiting services.
To locate a handset/s (while it's off the base), press under the base. The handset/s
beeps for 60 seconds.
Handset/s will ring when paged. Paging is cancelled by pressing any key on either
handset.
OR Press again to cancel paging.