Uniden XSR917/918 - Manual (Page 30)

RA
DIO
Page 22
USING THE SNOOZE FUNCTION
The Snooze function stops the Alarm/Buzzer momentarily. The Alarm/Buzzer
starts again after 10 minutes.
When the Alarm/Buzzer activates you can select the Snooze function by pressing
the
button.
You can keep selecting the Snooze function up to 6 times. When you select
Snooze for the 6th time the Alarm/Buzzer deactivates and Alarm set mode starts.
Moving the slide switch to the 'on' or 'off' position cancels Snooze function.
The Sleep function allows you to set a time delay to turn the radio off.
The available sleep times (delayed turn off) are 60,45,30 & 15 minutes.
The Sleep function can be set up in any slide sw position except 'on'.
Press to enter Sleep mode. Press repeatedly to select desired time
delay. The sleep time (60,45,30,15) will display during selection.
The display shows Zzz to indicate Sleep function set. You can check the
remaining time by pressing
.
Move the slide sw to any position to turn off the Sleep function.
To Set Sleep Time
USING THE SLEEP FUNCTION