Uniden XSR917/918 - Manual (Page 5)

INST
ALLA
TION
Making a Call
Page iv
Registering Your 2nd Handset Before Using
(XSR918 only)
After fully charging the handsets, remove the handset from the
extrachargingcradleand place it on the main base. (The
LEDwillbegintoflashindicatingregistrationis occurring).
Wait for at least 5 seconds before removing the extra handset from
the base.
The registration has been completed, and your dual handset
cordlessphoneisreadyforuse.
status
main
l
l
Pickupthehandsetandpress .Dialthephonenumber
OR
Dialthephonenumber-thenpress
Tohangup-press
OR
PlacethehandsetontheBaseUnit.
Answering a Call
l
HandsetontheBaseUnit:
Removethehandsetfromthebaseand
speak( ). AutoTalk
l
l
HandsetofftheBaseUnit:
Pickupthehandset,pressanykeyandspeak.
Tohangup-press
OR
PlacethehandsetontheBaseUnit.
Call Transfers
If the transferred
call is not picked
up after 5 minutes,
the call will be
disconnected.
TO TRANSFER CALLS
(XSR918 only)
To transfer your call from handset 1 to handset 2:
Press .
The call is placed on hold on the first handset, while handset 2 begins to ring.
The call is transferred when the 2nd handset is answered.
Repeat the process to transfer the call back to handset 1. Calls can be transferred from either handset.
l
l
l
l transfer