U-Line Refrigerator/Ice-Maker Combos - Manual (Page 17)

15
11. Fasten upper hinge to unit (3
screws). Partially tighten
screws until door is aligned.
See Figure 23.
9. Remove three plastic screw
plugs in hinge holes, top of
cabinet, opposite side. Be
careful not to scratch cabi-
net (see Figure 22).
10. Place door on lower hinge
pin. Invert and install upper
hinge on door.
8. Remove pivot screw from top hinge, invert screw and reinstall
pivot screw in top hinge. See Figure 19.
Figure 21
HINGE
RIGHT SIDE
DOOR SWING
LEFT SIDE
DOOR SWING
RIGHT SIDE
HINGE
INVERT
SCREW INVERT
HINGE
SCREW
UL115
PLASTIC
PLUG
HOLE
PLASTIC
PLUG
HOLE
UL114A
UL119
Figure 22
Figure 23
Users Manual 41923 9/2/03 3:44 PM Page 15