Vivitar 3D DIGITAL CAMCORDER DVR 790HD - Manual (Page 12)

11
Powering the Camera On/Off

Make sure the batteries have been inserted properly into your digital camcorder.
If your camera comes with a rechargeable lithium battery, make sure it is fully charged before
the first use.

Make sure an SD card has been inserted into your camera.
(SD card up to 32GB - SD Card not included)
Please see Initial Camera Setup for more information.
Powering the camera ON
Press the Power button to turn your camera ON.

After powering on, the camera emits a sound and the LED light turns on briefly.

The LCD screen turns on with your camera in Video Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the Power button again at any time to turn your
camera OFF.

A “Goodbye” screen appears and then the camera will power off completely.
Note: Your digital camcorder also has an Auto Power Off feature that will automatically turn off
your camera after a specific period of time that your camera is left idle. The Auto Power Off
settings can be set from the Auto Power Off settings menu (in either Photo Capture Mode or
Video Capture Mode).