Vivitar 3D DIGITAL CAMCORDER DVR 790HD - Manual (Page 7)

6
Turning On the Camera Using the Camera
When powering the camera on for the FIRST time the camera will take you through the
INITIAL CAMERA SETUP.
Powering the Camera ON
1) Battery
Make sure the battery is fully charged.
2) SD Card
Make sure the SD Memory Card has been inserted properly.
3) Power On
Press the POWER button to turn on the camera.
Setting the Camera Language
1) You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice by pressing the UP and DOWN
direction control buttons. Then press the SET button to confirm the selection.